The keypad will give a single beep. The On light will go out.
If any zone lights are flashing then an alarm occurred in that zone.
2. How To Arm
Close all protected doors and windows, and stop movement in the areas covered by motion detectors.
All the zone lights should be off.
Enter a valid user code or master code.
Press [9] to away-arm the panel.
The keypad will give two beeps. The On light will come on.
The exit delay will start – leave the protected area.
3. What To Do If Code Does Not Work
If an invalid code is entered the keypad will give a single long beep.
Re-enter the code.
4. How To Night Arm (Home Arm)
Close all protected doors and windows, and stop movement in the areas covered by motion detectors.
Enter a valid user code or master code.
Press [8] to home-arm the panel.
The keypad will give two beeps. The On light will flash.
The exit delay will start – leave the protected area.
5. How To Fully Arm
To fully arm, after being home-armed, the panel will need to be disarmed and rearmed in the away-arm
Enter [User Code] [0] [User Code] [9].
Keypad Functions
6. How To View Memory
Enter [#] [4]. The On-Line, Low Batt, AC Fail and On lights will all light up.
Pressing various keys while in review mode will display various events:
1. Displays past zone alarms since last armed.
2. Displays past alarms other than zones:
3. Displays other previous events:
0. Clears all review memories. This also happens when the panel is armed.
7. How To Exit Memory
If the On-Line, Low Batt, AC Fail and On lights are on, then press [∗] to exit 'review' mode.
The zone lights indicate which zones were tripped. The first zone to be tripped will be
Zone light 1 indicates a duress input has been triggered.
Zone light 2 indicates a panic input has been triggered.
Zone light 3 indicates a test input has been triggered.
Zone light 4 indicates a low battery input has been triggered.
Zone light 5 indicates an AC fail input has been triggered.
Zone light 6 indicates an on input has been triggered.
Zone light 7 indicates a fail to communicate input has been triggered.
Zone light 1 indicates the siren has sounded.
Zone light 2 indicates the strobe has been on.
Zone light 3 indicates the dialler has been triggered.
Zone light 4 indicates the dialler has failed to communicate.
Zone light 6 indicates that keypad lockout has occurred.
Zone light 7 indicates a low battery has stopped the siren & strobe.
Zone light 8 indicates the phone has been answered.
10 zone (23 pages)